How to fix RDS 2012r2 error: “Licensing mode for the Remote Desktop Session Host is not configured.”

Remote Desktop Session Host (RD Session Host) enables a server to host RemoteApp programs or session-based desktops. Users can connect to RD Session Host servers in a session collection to run programs, save files, and use resources on those servers.

We recently solved a known issue related to the licenses required to connect to a Remote Desktop Session Host server or a virtual desktop. The error description reads: “Licensing mode for the Remote Desktop Session Host is not configured.”

We developed a fix for the licensing issue with RDS on server 2012r2. We found some solutions for this known bug but none that actually worked. Incidentally, deleting the GracePeriod key like many forums said didn’t fix the problem.

To fix the problem, run the following commands in powershell to set the licensing server properly on the rd session host using the WMI CIM provider:

$obj = gwmi -namespace "Root/CIMV2/TerminalServices" Win32_TerminalServiceSetting
$obj. SetSpecifiedLicenseServerList("licserver.domain.local")

Then, go into the registry and manually set the licensing mode:

HKLM\SYSTEM\CurrentControlSet\Control\Terminal Server\RCM\Licensing Core\LicensingMode

You need to change the DWORD to 2 for Per Device or 4 for Per User.

Next, reboot the system. The changes made previously will report everything properly and the RDS host will now recognize the licensing configuration.

Source: http://www.tbngconsulting.com/blog/bid/404182/Licensing-mode-for-the-Remote-Desktop-Session-Host-is-not-configured

Configuring external time source on your Primary Domain Controller

1. Find out what your primary domain controller (PDC) is for your domain by executing the following powershell commands from any machine in the domain
   1. [System.DirectoryServices.ActiveDirectory.Forest]::GetCurrentForest().RootDomain.PdcRoleOwner.Name
      
2. Login to your primary domain controller
3. Open up a command prompt/powershell window with administrative privileges
4. Execute the following command to configure the domain controller to look at an external time source
   1. w32tm.exe /config /manualpeerlist:”0.us.pool.ntp.org 1.us.pool.ntp.org 2.us.pool.ntp.org 3.us.pool.ntp.org” /syncfromflags:manual /reliable:YES /update
      
      1. Notes: You can find the closest time server near you by browsing the following page and clicking on the nearest zone: http://www.pool.ntp.org/zone/@
5. Execute the following command to actually perform a time synchronization with the external source
   1. w32tm.exe /config /update
      
6. Execute the following command for the changes to take effect
1. Restart-Service w32time
   

Source: jackstromberg

Outlook Archive Problems

Outlook 2010

For Outlook 2010, the ArchiveIgnoreLastModifiedTime registry setting was introduced with the Microsoft Outlook 2010 hotfix package dated April 26, 2011 (KB2516474).

2516474 Description of the Outlook 2010 hotfix package (outlook-x-none): April 26, 2011

To create the ArchiveIgnoreLastModifiedTime registry value, follow these steps:

1. Click Start, click Run, type regedit in the Open box, and then click OK.
2. Locate and then click the following registry subkey:
   
   
   HKEY_CURRENT_USER\Software\Microsoft\Office\14.0\Outlook\Preferences
3. On the Edit menu, point to New, click DWORD Value, type ArchiveIgnoreLastModifiedTime, and then press ENTER.
4. Right-click ArchiveIgnoreLastModifiedTime, and then click Modify.
5. In the Value data box, type 1, and then click OK.
6. Exit Registry Editor.

Outlook 2013

To create the ArchiveIgnoreLastModifiedTime registry value, follow these steps:

1. Click Start, click Run, type regedit in the Open box, and then click OK.
2. Locate and then click the following registry subkey:
   
   
   HKEY_CURRENT_USER\Software\Microsoft\Office\15.0\Outlook\Preferences
3. On the Edit menu, point to New, click DWORD Value, type ArchiveIgnoreLastModifiedTime, and then press ENTER.
4. Right-click ArchiveIgnoreLastModifiedTime, and then click Modify.
5. In the Value data box, type 1, and then click OK.
6. Exit Registry Editor.

Restart requirement

You must restart Outlook after you add the ArchiveIgnoreLastModifiedTime registry.

View Startup programs

Start > Run

shell:startup

shell:common startup

How to solve Windows cannot read the setting from unattended answer file

When it appears the command prompt digit notepad c:\autounattend.xml
You have to search the string <ProductKey> and below this insert a new line that contains the string
<Key></Key>
You don't have to insert a code, only the tags.
Save the file and relaunch manually the command X:\Windows\Hpssbem.exe again
The installation will end fine.

Migrate 2003 DHCP Server

Export the DHCP database from Windows 2003:

1.                   On the Windows 2003 DHCP server, navigate to a command prompt

2.                   Type the following Command: netsh

3.                   Type the following Command: DHCP

4.                   Type the following Command: server <\\Name or IP Address>

5.                   Type the following Command: export c:\w2k3DHCPdb all

Note You must have local administrator permissions to export the data.

Import the DHCP database

1.       Copy the exported DHCP database file to the local hard disk of the Windows Server 2008-based computer.

2.       Install the DHCP Role on the server.

3.       Stop the DHCP server service on the server.  To do this, follow these steps:

a.       Log on to the target DHCP server by using an account that is a member of the local Administrators group.

b.      Click Start, click Run, type cmd in the Open box, and then click OK.

c.       At the command prompt, type net stop DHCPserver , and then press ENTER. You receive a "The Microsoft DHCP Server service is stopping. The Microsoft DHCP Server service was stopped successfully" message.

d.      Type exit, and then press ENTER.

4.       Delete the DHCP.mdb file under c:\windows\system32\DHCP folder.

5.       Start the DHCP server service.

6.       Right-click on the Command Prompt (cmd) and select run as administrator, to open the cmd prompt using elevated privileges.

Note You must have local administrator permissions to import the data.

7.       Type the following Command: netsh

8.       Type the following Command: DHCP

9.       Type the following Command: server <\\Name or IP Address>

10.   Type the following Command: import c:\w2k3DHCPdb

11.   Restart DHCP and verify the database has moved over properly.

Source: https://support.microsoft.com/en-us/kb/962355

Veeam Endpoint Backup > Send Email Notification

1. Criar c:\veeamscript.ps1 com o seguinte conteudo:

###########################################################
# Edit this part:
$youremailserver=    "0.0.0.0"
$sender      =   "origem"
$recipient   =   "destino"
###########################################################

# Put most info into the body of the email:
$TimeGenerated   =    get-eventlog "Veeam Endpoint Backup" -newest 1 -entrytype Information, Warning, Error -source "Veeam Endpoint Backup" | Format-List -property TimeGenerated | out-string
$Source      =   get-eventlog "Veeam Endpoint Backup" -newest 1 -entrytype Information, Warning, Error -source "Veeam Endpoint Backup" | Format-List -property Source | out-string
$EntryType   =   get-eventlog "Veeam Endpoint Backup" -newest 1 -entrytype Information, Warning, Error -source "Veeam Endpoint Backup" | Format-List -property EntryType | out-string
$Message   =   get-eventlog "Veeam Endpoint Backup" -newest 1 -entrytype Information, Warning, Error -source "Veeam Endpoint Backup" | Format-List -property Message | out-string
$InstanceID   =   get-eventlog "Veeam Endpoint Backup" -newest 1 -entrytype Information, Warning, Error -source "Veeam Endpoint Backup" | Format-List -property InstanceID| out-string
$Body      =   " $TimeGenerated Instance-ID: $InstanceID $Message "


# Determine the subject according to the result of the backup:
$hostname = hostname
if ($Message.contains("Success")) {
   $subject = "[Success] Endpoint Backup $hostname"
} elseif ($InstanceID.contains("110")) {
   $subject = "[Started] Endpoint Backup $hostname"
} else {  
   $subject = "[Failed] Endpoint Backup $hostname failed"
}


# Send the email using the powershell object (replace with e.g. blat.exe for older powershell-Versions)
if ($InstanceID.contains("110") -Or  $InstanceID.contains("190")) {
   Send-MailMessage -To $recipient -Subject $subject -From $sender -Body $body -SmtpServer $Youremailserver
} else {
   write-host "I don't want messages on 10010 and 10050 Restorepoint-creation or -remove Emails, skip those"
}


write-host "Script finished with -$instanceID- as the last event-ID"



2. Set the PowerShell Execution Policy to RemoteSigned (run as admin);

3.  Criar tarefa windows para enviar email quando o backup terminar:

In General :
Run whether user is logged on or not
Run with highest privileges
Password stored

Trigger
On an event
Basic
Log : Veeam Endpoint Backup
Source : Veeam Endpoint Backup
Enabled

Action :
Start a program c:\veeamscript.ps1

Settings and conditions by default